132 Search Results

This study provides a combined experimental and computational investigation into the structure and impact of the cation interdiffusion layer that appears at the gadolinium doped ceria (GDC)/yttria stabilized zirconia (YSZ) interface in solid oxide electrolysis cells (SOECs). Scanning transmission electron microscopy (STEM) illustrates that a ∼0.4 μm interdiffusion layer (IDL) with an intermixed cation distribution and fine grain size forms upon sintering. STEM identifies that the interdiffusion layer exists in the cubic fluorite structure despite changes in cation composition. The interdiffusion layer microstructure formed during sintering does not change during SOEC testing at either 1.3V or heightened voltage pulse testing.more » Modeling predicts that ionic conductivity may decrease in the interdiffusion layer due to Coulombic trapping between mobile oxygen vacancies and excess Gd3+ acceptor dopants. Yet, the density and continuous nature of the layer should benefit cell stability by substantially reducing the formation of SrZrO3, which is corroborated by STEM and Synchrotron X-ray diffraction (XRD). We conclude that the interdiffusion layer acts as a beneficial barrier to Sr diffusion, when operating in a regime where electrolyte void formation is not observed.« less

Lithium–sulfur (Li–S) batteries show great promise as the next-generation rechargeable batteries, yet they still suffer from polysulfide shuttling and interphasial instability. Electrolyte, as the medium for ion transport and sulfur conversion, plays a crucial role in overcoming these challenges. Here, we introduce a moderately solvating electrolyte (MSE) based on low-density, low-viscosity, and nonfluorinated ether co-solvents that balances polysulfide suppression, Li metal stabilization, and redox kinetics. Through multiple solvent–solvent and solvent-ion interactions, the optimized MSE weakens Li⁺-solvent pairing while strengthening cation–anion interactions, thereby lowering the desolvation barrier and promoting the formation of a favorable solid–electrolyte interphase (SEI). Meanwhile, MSE limits themore » polysulfide dissolution but improves the accessibility of active material through better wettability and tailored solvation environment, leading to an altered sulfur deposition mechanism with β – α conversion. This approach enables a stable cycling of high-mass loading Li–S cells (> 3.5 mg cm^-2) at both room temperature and 45 °C (where shuttling and side reactions are severer), and demonstrates a pouch cell with lean electrolyte content (4.5 µL mg s^-1). This work highlights a practical route to develop high-performance electrolyte for Li–S cells and provides mechanistic insights into their operation.« less

For anode‐free sodium batteries to achieve practical consideration, highly reversible chemistries require exceptional ≥99.95% coulombic efficiencies that maintain over prolonged cycling periods. To do so, consumption of this severely limited sodium inventory must be restricted while metal nucleation processes that comprise the in situ formed metal anode are improved. Herein, we describe a fluorine‐free carborane electrolyte that satisfies these criteria by emphasizing reductive stability and weakly coordinating anion behavior as design principles. We find this approach promotes the development of a thin, robust SEI chemistry rich in both organic speciation and boron. The electrolyte described herein exhibits ideal metal nucleationmore » behavior on one‐micron thin carbonaceous current collector surfaces and achieves a metal deposition/stripping efficiency near parity for 400 cycles. This novel anode chemistry is introduced to anode‐free full cell configurations where 87% of the initial discharge capacity is retained after 1000 cycles at 2.0 C. In conclusion, post‐test characterization of deep‐cycled anode‐free cells reveals suppressed capacity fade in these systems is attributed to the chemical stability of the carborane anion.« less

Here, the Tritium Extraction eXperiment (TEX) is a forced-convection lead-lithium (PbLi) loop in the Safety and Tritium Applied Research (STAR) facility at Idaho National Laboratory (INL) with the purpose of providing validation data for the vacuum permeator tritium extraction concept. A vanadium tube of 1000 mm length, 12.7 mm outside diameter, and 0.50 mm wall thickness is installed in the test section of TEX. The installed vanadium tube is characterized to quantify impurity concentrations, surface chemistry, and microstructure to elucidate permeation phenomena observed in experimentation. Herein, the permeation properties of the vanadium tube are characterized by measuring deuterium permeation atmore » 300 °C, 325 °C, and 350 °C at 100 kPa, 125 kPa, and 150 kPa total pressures with 5000 ppm deuterium in helium gas mixture in a once-through flow configuration. The hydrogen isotope permeation through the vanadium tube in the test section is measured with quadrupole mass spectrometers and the hydrogen isotope concentration in the feed and retentate gas stream is measured with gas chromatography. The transient permeation results are modeled with MELCOR-TMAP, a thermal-hydraulic tritium transport code, and compared well with literature data.« less

Li-ion batteries, when charged at fast-charging rates ($>$2C), suffer from reduced lifetimes and can undergo catastrophic failure. During high-rate charging, Li-ions are unable to rapidly transport through high-loading electrodes ($>$4 mAh cm⁻²). This results in unequal charge distributions, potentials, and utilization of the active material, which can lead to Li plating. Li-ion concentration polarization, in which Li-ions deplete in the anode and accumulate in the cathode during charging, precedes Li plating. An operando FTIR-ATR graphite/NMC cell developed in this research captured Li-ion concentration polarization in real-time. During fast charging, decreases in Li-ion concentration ($>$95%) were measured at the back ofmore » the anode. This is the first verification of complete Li-ion depletion within the anode at high C-rates. The measurements also showed graphite stage transition. A P2D model was developed for comparison to the operando measurements. The measurements agreed with the model in some cases, but disparities existed at high C-rates and loadings. In the experiment, the Li-ion concentration often failed to recover to 1.2 M until several hours after charging, whereas the model Li-ion concentration rapidly recovered. The contrast between the model and experiment results indicates that further investigation is required to improve understanding of Li-ion concentration dynamics during fast charging.« less

The electrochemical nitrate reduction reaction (NO₃RR) offers a pathway to produce NH₃ for fuel and fertilizer from waste NO₃⁻. In this work, a polycrystalline vanadium sulfide (VS_x), which is derived from solvothermally grown and annealed VS₂, is shown to exhibit excellent NO₃RR activity (2.3 ± 0.6 mg·cm⁻² geo.·h⁻¹ @ −0.92 V_RHE) and Faradaic efficiency to NH₄⁺ (69 ± 6% at −0.69 V_RHE) in buffered neutral pH electrolyte containing 0.1 M NO₃⁻. A variety of characterization techniques are leveraged to support the VS_x assignment, including X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, selected area electron diffraction, and X-ray diffractionmore » measurements. The VS₂ annealing step reduces the oxide character and generates VS_x, which, based on the improved NO₃RR activity, results in the creation of active sites for NO₃⁻ binding. To help shed light on NO₃RR on VS_x, VS₂ is used as a model system, and a grand-canonical density functional theory (GC-DFT) investigation of VS₂ shows strong evidence that S vacancies are active sites for NO₃RR, where NO₃⁻ outcompetes H⁺ for adsorption at the S-vacancy sites. Moreover, GC-DFT results highlight a thermodynamically favorable reaction to generate NH₄⁺ in an aqueous electrolyte at relevant cathodic potentials. As an annealed material, VS_x may contain undersaturated V sites, which show an electronic structure similar to the theoretically calculated S-vacancy site of VS₂, and these sites may contribute to the observed increase in NO₃RR activity and selectivity for NH₄⁺ on VS_x versus unannealed VS₂. Finally, kinetic isotope effect measurements suggest that the kinetic rate-limiting step of the NO₃RR on VS_x is not proton-coupled, indicating it may be the first electron transfer to adsorbed NO₃*.« less

Aminopolycarboxylate chelates are emerging as a promising class of electrolyte materials for aqueous redox flow batteries, offering tunable redox potentials, solubility, and pH stability through careful selection of ligands and transition metal ions. Despite their potential, the impact of molecular structure modifications on the electronic and electrochemical properties of these chelates remains underexplored. Here, in this study, we examine how introducing a hydroxyl group, often employed for its solubilizing properties, to the backbone of CrPDTA, a reference chelate material, significantly changes the thermodynamics and kinetics of the chelate's redox process. We correlate changes in molecular and electronic structures to differentmore » electrochemical responses resulting from the hydroxyl addition and show that the introduction of this functional group leads to a distortion in the octahedral coordination of chromium. Furthermore, increased anisotropic spin density and nonintegral oxidation state changes in the Cr metal center result in a larger barrier for electron transfer in CrPDTA‐OH. It is demonstrated that preserving a hexacoordinate chelate structure across a broad pH range is crucial for efficient flow battery application and it is emphasized that ligand modifications must avoid distorting the octahedral coordination of the transition metal.« less

The rapid growth of electric vehicles (EV) has driven the widespread use of lithium-ion batteries (LIBs). This will result in a large amount of spent batteries that if not properly disposed will pose significant environmental damage, especially from the electrolyte. The electrolyte contains lithium hexafluorophosphate (LiPF₆), which when treated by either incineration or water washing can generate harmful F- and P-containing substances such as hydrofluoric acid (HF). In this study, an innovative two-step process is presented to separate and purify both the solvents and lithium salts from the spent electrolyte. Antisolvent assisted precipitation is used to selectively isolate LiPF₆ saltmore » in the form of a complex with ethylene carbonate. Subsequent distillation then separates the volatile electrolyte solvents and antisolvent from each other effectively. In addition, a new process to further purify LiPF₆ from its ethylene carbonate (EC) complex is also presented. This electrolyte recycling method not only enables the recovery of the high-value LiPF₆ salt and the electrolyte solvents, but also paves the way for environmentally responsible and circular LIB recycling.« less

Lithium (Li)-excess transition metal oxide materials which crystallize in the cation-disordered rock salt (DRX) structure are promising cathodes for realizing low-cost, high-energy-density Li batteries. However, the state-of-the-art electrolytes for Li-ion batteries cannot meet the high-voltage stability requirement for high-voltage DRX cathodes, thus new electrolytes are urgently demanded. It has been reported that the solvation structures and properties of the electrolytes critically influence the performance and stability of the batteries. In this study, the structure–property relationships of various electrolytes with different solvent-to-diluent ratios are systematically investigated through a combination of theoretical calculations and experimental tests and analyses. This approach guides themore » development of electrolytes with unique solvation structures and characteristics, exhibiting high voltage stability, and enhancing the formation of stable electrode/electrolyte interphases. These electrolytes enable the realization of Li||Li_1.094Mn_0.676Ti_0.228O₂ (LMTO) DRX cells with improved performance compared to the conventional electrolyte. Specifically, Li||LMTO cells with the optimized advanced controlled-solvation electrolyte deliver higher specific capacity and longer cycle life compared to cells with the conventional electrolyte. Additionally, the investigation into the structure–property relationship provides a foundational basis for designing advanced electrolytes, which are crucial for the stable cycling of emerging high-voltage cathodes.« less

The electrolyte plays a critical role in lithium metal batteries. In particular, ion solvation profoundly impacts key electrolyte properties and battery performance. Here, in this study, we systematically investigate solvation-property relationships in a series of electrolytes with different solvent-diluent ratios. Through potentiometric techniques that measure the relative solvation free energies of electrolytes, we find that weaker solvation correlates with larger ion clusters, lower ionic conductivity and diffusion coefficient, and superior electrochemical stability. Weaker solvation leads to the formation of a small number of Li clusters with large hydrodynamic radii, which lowers the Li⁺ diffusivity and ionic conductivity of the electrolyte.more » Concurrently, weaker solvation leads to improved electrochemical stability at both the cathode and anode interfaces. Understanding these solvation-property relationships and trade-offs is important to designing electrolytes for optimized lithium metal battery performance.« less